Q&A Session – Question 3: Why use Putzmeister rollers in my Telebelt?

Using the right rollers in the correct position is very important to the life of the belts and the over-all performance of the Telebelt. Once again, the location and design of our rollers are a product of years of experience and practical application. Building a “cheaper” roller is not always in the best interest of practical application.
This can be the case if roller design and fabrication cost savings end up producing a design that threatens the integrity and longevity of more costly components, such as belts. This can also be the case if new approach or design just does not perform as well. As an example, our hopper roller design prevents the belt from being “pulled” down between the roller and into the U-shank brackets when tensioning the belt (see images above and below).


Our roller caps are a simple and re-useable design that has worked rather well over many years. People have tried to substitute these caps with other designs without the same level of success, resulting in one-time-use and often missing roller caps (see left and below).

Leave a Comment

Your email is never published nor shared.

(required)
(required)