Building a Counterweight Lock

Basic requirements when building a counterweight lock:
  • Weights must be at least 6,000 kilograms, but not well over. This could lead to a “nose heavy” boom when extended over the front.
  • The weights must be off the ground.
  • The pull lock cylinder must be retracted BEFORE raising the machine with outriggers.  The cylinder must be retracted to 2″ or less ( < 50 mm ) when the cylinder circuit goes to relief.  At this time the weight will still be on the ground.  When the machine is raised, with the outriggers, the weights will come off the ground.

Dimensions of the counterweight can be a simple block but can vary in many different shapes. For example, Putzmeister provides a bracket style with the unit. Regardless of the weight’s shape, how wide, tall, and deep the weight is should be calculated according to the material used.

12107927n
12107885n

Leave a Comment

Your email is never published nor shared.

(required)
(required)