Rebuilding the Return Roller

First and Foremost clean all debris off shell and shaft and inspect for damage prior to building.

Untitled-1

Disassembly:

  1. Remove #6 outer from each end.
  2. Remove #5 outer from each end.
  3. Remove #6 inner from each end.
  4. Remove #4 from #2 at each end.
  5. Remove #1 from #2 by pressing from the opposite side of #8.
  6. Remove #8 from #1.
  7. Remove #3 from #1.
  8. Remove #3 from #2.

For reassembly, simply reverse steps 1 through 8.

Note: Click the image to view numbers.